Plug & Play Jumper Module p/n SLMOD6PM

NOTE:  This newly updated jumper module replaces p/n SLMODVAR which has been discontinued.

This jumper module is used with SignaLink USB p/n SLUSB6PM or radio cable p/n SLCAB6PM, as well as some of our other SignaLink and radio cable part numbers as detailed on their respective pages.  This module has been updated to support the selection of the radio's 1200 baud audio line (factory default setting) or the 9600 baud audio line via a simple push-on jumper.  Virtually all sound card modes (FT8, PSK31, RTTY, etc.) use the 1200 baud audio line, but some modes such as VARA Wide require the wider bandwidth of the 9600 baud audio line for proper operation.  This module is compatible with virtually all radios that have a 6-pin mini DIN Data Port. For a list of compatible radios please click here.

NOTE:  VARA Wide users will need to move the jumper from the factory default "12" position (two pins closest to the "12" marking) to the "96" position (two pins closest to the "96" marking).  This will select the radio's 9600 baud audio line.